Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Connecting multiple D2700 enclosures on LSI MegaRAID 9285-8e controller

dells2k
Occasional Visitor

Connecting multiple D2700 enclosures on LSI MegaRAID 9285-8e controller

I'm having some trouble connecting more than one D2700 enclosure to a LSI MegaRAID 9285-8e controller. It seems like the enclosure ID stays the same on every enclosure, so when I connect one enclosure on port A and another enclosure on port B on the LSI controller, it only sees it as one enclosure. I'm getting disk errors and other wrong information, when there's more than one enclosure connected to the controller.

 

Is there any way I can change the enclosure ID on the enclosures?

1 REPLY
norman_schmiedt
Occasional Visitor

Re: Connecting multiple D2700 enclosures on LSI MegaRAID 9285-8e controller

did solve the problem ?

 

i have tested a d2700 on different lsi controllers ( 9266 / 9271 )

 

i always get 1 or 2 disks shown , outside of the enclosure ( as seen on your screenshot )