Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Convert 1 single disk to Raid-1

 
SOLVED
Go to solution
Occasional Visitor

Convert 1 single disk to Raid-1

Hi

System: HP Proliant DL380 Gen10, HPE Smart Array P408i-a SR Gen 10, 2x300 GB disks, 2x600 GB disks.

RAID Configuration:  2x300 GB RAID-1. 2x600 GB configured as separate physical disks.

Problem: OS was accidentally installed on a single 600 GB disk.

Question: is it possible to migrate from a single  600 GB disk to RAID-1 without re-installing OS?

According to HP support they cannot provide clear answer whether this is possible, instead they simply provide ACU user guide that does not lead to answer, since OS is installed on a non-RAID disk.

Would be grateful for any guidelines in this matter.

2 REPLIES 2
Acclaimed Contributor
Solution

Re: Convert 1 single disk to Raid-1

AFAIK you cannot convert a direct access disk into RAID or vice versa because of different disk layout.

You should consider to use a disk cloning tool and copy/move the data to the other logical drive.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor

Re: Convert 1 single disk to Raid-1

Hi Torsten,

thanks for your input! I will give it a try!

Regards

Marcus