Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

D2600 SAS AJ940A with 3TB drives only showing up as 2199

DBurgoyne
Occasional Visitor

D2600 SAS AJ940A with 3TB drives only showing up as 2199

All of my firmware and drivers are updated on this system, but my 3TB drives are only showing as 2199GB in the ACU, it's attached to a Smart Array P411 card. No errors, just misreporting the drive size....

 

Any advice?

 

 

3 REPLIES
Johan Guldmyr
Honored Contributor

Re: D2600 SAS AJ940A with 3TB drives only showing up as 2199

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02910174&lang=en&cc=us&taskId=125&prodSeriesId=3886974&prodTypeId=329290

 

"HP Smart Array Controller Firmware Version 5.06 is the minimum firmware version required to support 3TB or larger HP SAS/SATA hard drives attached to an HP Smart Array P212, P410/P410i, P411, or P812 Controller."

DBurgoyne
Occasional Visitor

Re: D2600 SAS AJ940A with 3TB drives only showing up as 2199

Yep, like I mentioned all of the firmwares are up to date... 

 

P411 

Firmware Version

6.00

 

Enclosure

Firmware Version

0147

 

 

Johan Guldmyr
Honored Contributor

Re: D2600 SAS AJ940A with 3TB drives only showing up as 2199

Old ACU version then?