HPE Community
Disk Enclosures
1753377 Members
5127 Online
108792 Solutions
New Discussion

DL360 w/ RAID 1+0: swapping physical drive

 
Alan Wright_1
New Member

‎02-24-2003 07:33 AM

‎02-24-2003 07:33 AM

DL360 w/ RAID 1+0: swapping physical drive

I have a DL360 w/ RAID 1+0 and (2) 36.4 GB drives. I want to remove one of the drives, replace it w/ a new drive. Let the new drive sync w/ the other running drive. Remove the new drive, and keep it as an offline backup. Then re-install the other original drive. How do I accomplish this? Do I need to delete the logical drive? Or just remove one of the drives hot?
0 Kudos
Reply
1 REPLY 1
Vincent Fleming
Honored Contributor

‎02-24-2003 07:43 AM

‎02-24-2003 07:43 AM

Re: DL360 w/ RAID 1+0: swapping physical drive

I would shut down the host, so that the drives are fully sync'ed and consistant, then

remove the drive you wish to remove.

Boot the system, and listen to it complain.

Once up, install the new drive and let it Sync.

Good luck,

Vince
No matter where you go, there you are.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.