DS2405 and minor warnings on SDM

[Schmitt Ulrich]

How could I display the log messages
for my DS2405. I got an warning
message for one DS2405. I see minor
warning when I start the SDM.
Is armlog the right tool to log the messages ?
Can I clear all logfiles to get an
(green) default status on the SDM ?

[Eugeny Brychkov]

Is this DS2405 connected to Virtual Array controller enclosure of just standalone JBOD?
Eugeny

[Schmitt Ulrich]

Its a stand alone (JBOD)

The JBODdsp shows minor warnings for the
DS2405. How could I see the warnings ?

[Bernhard Mueller]

You should have CommandView 1.06 and use JBODlog I guess.

option -C should clear the logs

Regards,
Bernhard

[Schmitt Ulrich]

The JBODlog command is a proper way to log
the disks, but this is not my problem.

The JBODdsp -a command display the whole info
for the disk array. See the short printout attached:

How could I display/clear the status of the diskarray ? It has minor warnings.

[Eugeny Brychkov]

Check CV for DS manual at http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg29284/lpg29284.pdf
Eugeny

[Schmitt Ulrich]

I have checked the manual before.
I didn??t see any kind of command/function
to view/clear the status of the diskarry.