Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

DS2405 and minor warnings on SDM

Schmitt Ulrich
Occasional Visitor

DS2405 and minor warnings on SDM

How could I display the log messages
for my DS2405. I got an warning
message for one DS2405. I see minor
warning when I start the SDM.
Is armlog the right tool to log the messages ?
Can I clear all logfiles to get an
(green) default status on the SDM ?
6 REPLIES
Eugeny Brychkov
Honored Contributor

Re: DS2405 and minor warnings on SDM

Is this DS2405 connected to Virtual Array controller enclosure of just standalone JBOD?
Eugeny
Schmitt Ulrich
Occasional Visitor

Re: DS2405 and minor warnings on SDM

Its a stand alone (JBOD)

The JBODdsp shows minor warnings for the
DS2405. How could I see the warnings ?
Bernhard Mueller
Honored Contributor

Re: DS2405 and minor warnings on SDM

You should have CommandView 1.06 and use JBODlog I guess.

option -C should clear the logs

Regards,
Bernhard
Schmitt Ulrich
Occasional Visitor

Re: DS2405 and minor warnings on SDM

The JBODlog command is a proper way to log
the disks, but this is not my problem.

The JBODdsp -a command display the whole info
for the disk array. See the short printout attached:

How could I display/clear the status of the diskarray ? It has minor warnings.
Eugeny Brychkov
Honored Contributor

Re: DS2405 and minor warnings on SDM

Schmitt Ulrich
Occasional Visitor

Re: DS2405 and minor warnings on SDM

I have checked the manual before.
I didn??t see any kind of command/function
to view/clear the status of the diskarry.