HPE Community
Disk Enclosures
1752681 Members
5179 Online
108789 Solutions
New Discussion

DS2600 Disk issue

 
Alexra
Occasional Contributor

‎06-17-2013 12:23 AM - last edited on ‎06-17-2013 07:21 PM by

‎06-17-2013 12:23 AM - last edited on ‎06-17-2013 07:21 PM by

DS2600 Disk issue

Dear all,

 

i´ve install an brand new D2600 disk storage withe 2 x enclosure with 19 disk connectet in dual domain mode.

 

Configuration:

P421i Raif 6 with HS   1 HS + enclosure

 

I got the folloeing errormessage in in eveltlog system:

 

A drive failure notification has been received for the SATA physical drive located in bay 1.  This drive can be found in box 1 which is connected to port 2E of the array controller P421 located in server slot 2.  The failure reason received from the HP Smart Array firmware is: MISSING_IN_TOPOLOGY.

 

The message appears for all 12 disk in enclosure 1.

 

Did anybody has this message befor?

 

regards,

Alexander

 

 

P.S. This thread has been moved from Disk > DS2600 Disk issue to Disk Array. -HP forum moderator

 

0 Kudos
Reply
1 REPLY 1
pancuz
New Member

‎06-23-2013 12:37 AM

‎06-23-2013 12:37 AM

Re: DS2600 Disk issue

D2600 jbod is LFF with 12 disks. Since, you are mentioning 19 disks, I am assuming you are cascading two jbods.And i believe the problem is with cascading. Can you please check cabling, if you have followed recommended cabling steps while cascading two or more jbods? At least " MISSING_IN_TOPOLOGY" message points towards that. 

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.