Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Disk System 2300 in full bus and 2 hosts

ahpux
Occasional Contributor

Disk System 2300 in full bus and 2 hosts

I am installing a disk system 2300 with 2 BCCs, 9 hard disks, in full bus mode so that 2 hosts can access it. Host A's HBA is having scsi id as 7 and Host B's HBA is having scsi id as 13. The connection is as follows:
Host A's HBA to BCC1 port A. BCC1 port B to BCC2's port A. BCC2's port B to Host B's HBA.
Presently both the systems fail to boot and report "software Failure" while the PDC is getting loaded.
Has anybody configured DS2300 in full bus with 2 hosts?
1 REPLY
Zygmunt Krawczyk
Honored Contributor

Re: Disk System 2300 in full bus and 2 hosts

You should set scsi id to 6 at host's B HBA (not 13).

Regards,
Zygmunt