HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

EMC problem?

 
Odd Olsson
Advisor

EMC problem?

We have an EMC array and having this error messages on the console during the reboot.

Starting EMC PowerPath
emcp:Mp:Error: All paths to Symm 000287750504 vol 015c are dead.

This repeats with different vol numbers 5 times totally.

We have 5 lunes from the EMC array.

Any Ide what this means.
It look like we have all this disc with us. (ioscan)
We have build volumes on them also.

Chers.
OJobb
2 REPLIES
Mobeen_1
Esteemed Contributor

Re: EMC problem?

Odd,
It looks like this is complaining about the path. I would suggest that you reseat the links and try again as a first step.

Also check the status of the links using
'/opt/EMCpower/bin/powermt display'

rgds
Mobeen
Ersinf
Visitor

Re: EMC problem?

Hi,
Use '/sbin/powermt check' and remove all dead device path.

For example:
#powermt check
Warning: Symmetrix device path c12t0d0 is currently dead.
Do you want to remove it (y/n/a/q)? y
Warning: Symmetrix device path c12t0d1 is currently dead.
Do you want to remove it (y/n/a/q)? y
Warning: Symmetrix device path c12t0d2 is currently dead.
Do you want to remove it (y/n/a/q)? y