EMC storage (simmetrix)

[andrea_53]

Hi!
I have some EMC LUN connected to my HP server.
I need to get some information about them.

I use the command xpinfo with xp512 LUN.
I would like to know if there is a similar command for EMC.
Thank you.

[harry d brown jr]

inq

live free or die
harry

[John Poff]

Hi,

Also, the 'inq -et' command will show you which port in the Symmetrix each controller/drive is connected to.

JP

[Juan Manuel López]

Hi all !.
U have to use " inq " command.
Also u can use syminq command, that give you more information.

I hope this help you.

Juanma

[Ashwani Kashyap]

inq or syminq .

IF you have symcli installed , can also use symdev .

[Deshpande Prashant]

HI
You would use the EMC utility "inq" to enquire the EMC LUNS.
It is part of the EMC software EMC Control Center.

Thanks.
Prashant.

[fg_1 · Accepted solution]

Use syminq to get information about your emc disk. This will also list out your gatekeeper devices as well as regular disk.

If you want a nice printout of your layout inside the EMC Symmetrix ask your EMC SE to take your BIN file and put it into excel, our SE did this and it gives a nice mapping of the drives and where they are mapped to.

Gl.

[liam Fogarty_1]

inq is the best way to go.
or if you have solutions enabler then you can do
sympd list
or syminq
then do symdev show ,deviceid. to get more info about that device....