HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

EMS Hardware Monitor for VA series Storage

 
Cao Da Shi
Occasional Advisor

EMS Hardware Monitor for VA series Storage

Is there now a special hardware monitor for VA series storage. Where is all the events defined?
Always Learning
1 REPLY
Cheryl Griffin
Honored Contributor

Re: EMS Hardware Monitor for VA series Storage

According to the support products matrix, the VA7400 which is product A6189A is supported as of July 2000: http://www.docs.hp.com/hpux/onlinedocs/diag/ems/ems_prod.htm#High_Availablity_Storage_System

It has special requirements, also listed there:
Special Requirements

HP-UX 11.xx, September 2000 Release or later
TCP/IP port 2818 must be available

For information on the monitors follow the Supported by "Remote Monitor" link which takes you to http://www.docs.hp.com/hpux/onlinedocs/diag/ems/emd_rem.htm
"Downtime is a Crime."