Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 4000: how to disable Automatic start on Power Restore

Abu Abdullah
Occasional Advisor

EVA 4000: how to disable Automatic start on Power Restore

I have wrote an script to shutdown the 2 eva's on power failure and that activated on UPS triger. but when power is restored i don't want to start my eva's in my absence.
in my servers there is a setting that on power restore 1-start, 2-off, 3-restore previous state.
i want EVA to be OFF after power restore. where can i change this setting??
5 REPLIES
Ivan Ferreira
Honored Contributor

Re: EVA 4000: how to disable Automatic start on Power Restore

I think that you cannot control this behaviour, you should turn off the key on the rear of the controllers.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
askar(kz)
Occasional Visitor

Re: EVA 4000: how to disable Automatic start on Power Restore

Hello, I faced with this problem too.
Could you pls give me your above mentioned script for EVA power management?
askar(kz)
Occasional Visitor

Re: EVA 4000: how to disable Automatic start on Power Restore

Thanks, I don't need it anymore. I wrote it by myself.
Prabhu_M_G
Occasional Advisor

Re: EVA 4000: how to disable Automatic start on Power Restore

Dear All,


I also need same type of help, i am having two set of one SMA and EVA 3000. i require a script which can shutdown my EVA when i require. very urgent for me, please help me


Thanks & Regards
Prabhu
Rob Leadbeater
Honored Contributor

Re: EVA 4000: how to disable Automatic start on Power Restore

Hi Prabhu,

Again, you will probably be better of starting a new thread for this, as your question is slightly different.

You should however, probably be looking at this manual as a starting point:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00605847/c00605847.pdf

Cheers,

Rob