Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 4400 autopath

SOLVED
Go to solution
Frido Roose_1
Occasional Advisor

EVA 4400 autopath

Hello,

At our customer, they have an EVA 4400 with HP-UX 11.11 and Secure path A.3.0F.02F.02F

After an ioscan, I see the LUNs like:
disk 17 0/4/1/0.1.6.0.0.0.1 sdisk CLAIMED DEVICE HP HSV300
/dev/dsk/c9t0d1 /dev/rdsk/c9t0d1
disk 18 0/4/1/0.1.7.0.0.0.1 sdisk CLAIMED DEVICE HP HSV300
/dev/dsk/c11t0d1 /dev/rdsk/c11t0d1

But for some reason, autopath doesn't see the new LUNs. I already tried "autopath discover", but no luck.

What am I missing?

I know I can use pvlinks, but I wonder why autopath doesn't see the EVA 4400 LUNs. There is also connected an HSV101, for which autopath sees the LUNs.
3 REPLIES
Uwe Zessin
Honored Contributor
Solution

Re: EVA 4400 autopath

I think you need Secure Path 3.0F Service Pack 3 to recognize the EVA4400:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?&swItem=co-58128-1
.
Frido Roose_1
Occasional Advisor

Re: EVA 4400 autopath

Thanks, this was the solution.

I had verified the SPOCK information, and it stated that HP:SecurePath for HP-UX (3.0F SP1, SP2) was sufficient.

After installing SP3, the deviced showed up in autopath!
Frido Roose_1
Occasional Advisor

Re: EVA 4400 autopath

Install SP 3.0F service pack 3