HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Showing results for 
Search instead for 
Did you mean: 

EVA 4400

Occasional Contributor

EVA 4400

Hi There


I need to update the firmware on our EVA 4400 controllers so I can expand a Vdisk above 2Tb to do this I need to install Command View 10 however we don't connect to the EVA via FC we do it by iscsi.


Is there away I can update the Command View on the Management Module? So after that I update the firmware on the EVA controller firmware to expand the Vdisk above 2Tb?




Brett Wright

Honored Contributor

Re: EVA 4400


You can upgrade Command view on the Management module through the network

you can even connect directly from a laptop. Default address is

that is not a problem you can update the firmware directly through the management module



give a kudo if you liked

Re: EVA 4400



You can refer to the XCS upgrade guides from the link : http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&prodClassId=-1&contentType=SupportManual&prodTypeId=12169&prodSeriesId=3664763

based on your version upgrades.


For CV-EVA refer to the below link : http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02523041/c02523041.pdf


To assign points on this post? Click the white Thumbs up below!