Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 8000 - Max Vdisk Size reports incorrect values

EricMA
Occasional Visitor

EVA 8000 - Max Vdisk Size reports incorrect values

Hello,

I've a diskgroup with 72 HD (450GB). Total capacity is 29330GB and allocated is 22338GB. Since i've deleted/created some Luns, the Maximum Vdisk size reported in CV 9.2 seems incorrect:
Vraid0 = 332 GB, Vraid5= 266GB

I've move the eva to another management CV, but same result.

Any idea how to resolv this problem without rebooting (or sync2A) the EVA controllers ?
4 REPLIES
Torsten.
Acclaimed Contributor

Re: EVA 8000 - Max Vdisk Size reports incorrect values

The resync normally solves such issues.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AnthonySN
Respected Contributor

Re: EVA 8000 - Max Vdisk Size reports incorrect values

what is the xcs version?
resync would solve the problem
by 2A accessing the hidden page of cv
EricMA
Occasional Visitor

Re: EVA 8000 - Max Vdisk Size reports incorrect values

XCS version is 6220
A resync has already be done few weeks ago. But the issue come back.
AnthonySN
Respected Contributor

Re: EVA 8000 - Max Vdisk Size reports incorrect values

then a reboot of the master controller is required.