Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 8000, Windows server HSV210 driver not loaded after FF MPIO DSM?

SOLVED
Go to solution
Craig Howe_1
Regular Advisor

EVA 8000, Windows server HSV210 driver not loaded after FF MPIO DSM?

Hi

I have an EVA 8000, have installed FF MPIO DSM on the new Windows server and restarted.

It brings up yellow question marks for HSV210.

So wondering if I need to install something else to get the driver loaded for the controllers and stop the unknown devices showing up?

I had secure path loaded on the EVA 5000 and it didnt have this problem.

thanks
2 REPLIES
Sameer_Nirmal
Honored Contributor

Re: EVA 8000, Windows server HSV210 driver not loaded after FF MPIO DSM?

Depending on the version of Windows Server and XCS of EVA8000 you have, you might want to check the following link to ensure the pre-requisites are met.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=421494&prodTypeId=18964&prodSeriesId=421492&swLang=8&taskId=135&swEnvOID=227
David Tapper_1
Valued Contributor
Solution

Re: EVA 8000, Windows server HSV210 driver not loaded after FF MPIO DSM?

Hello,

Download the latest driverkit for your FC-card from hp.com. The controller definition are in the driver.

Regards,
David