Disk Enclosures
1748248 Members
3631 Online
108760 Solutions
New Discussion юеВ

Re: EVA 8100 300gb drive

 
Suzi Fischman
Frequent Advisor

EVA 8100 300gb drive

I replaced a 300gb 15k drive this weekend and the firmware needs to be upgraded. I have never done this before. I was wondering if there is a Manual that I could go to that will give me instructions on upgrading the firmware.
This is the message in the log. Thanks for any help.

An unrecognized Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process.
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: EVA 8100 300gb drive

Maybe your XCS verson is too old - what firmware does the EVA have?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
V├нctor Cesp├│n
Honored Contributor

Re: EVA 8100 300gb drive

The message means that the disk has a newer firmware version than the one on the EVA firmware tables.

Minimum firmwares required here:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01898270/c01898270.pdf
Suzi Fischman
Frequent Advisor

Re: EVA 8100 300gb drive

Thank you for the information. It looks like the disk is OK based on the information provided. Will have to dig a little more to find out what the Attention is for.

Thanks again