Disk Enclosures
1748027 Members
5128 Online
108757 Solutions
New Discussion юеВ

EVA5000 array with HSV110 configurations

 
Mixa Nguyen
Occasional Advisor

EVA5000 array with HSV110 configurations

Hi all,

I notice that I can save the configuration in the EVA management but there is no button that allows me to restore the configuration. How do I restore the configuration on the EVA?

Thanks all.
4 REPLIES 4
Steven Clementi
Honored Contributor

Re: EVA5000 array with HSV110 configurations

Mixa:

You should be able to use SSSU to capture and restore a configuration. This would only restore the layout of your vdisks, hosts, folders, etc. Restoring data is a separate process after the fact.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
Mixa Nguyen
Occasional Advisor

Re: EVA5000 array with HSV110 configurations

Thanks Steven.
Ivan Ferreira
Honored Contributor

Re: EVA5000 array with HSV110 configurations

Use SSSU capture configuration command to save the configuration.

To restore the configuration, use sssu file filename*.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Mike Reznak
Trusted Contributor

Re: EVA5000 array with HSV110 configurations

Hi,

it's very handy for some global naming conventions or folder structure changes. Just save the config, delete the lines, you don't want to process, make desired changes and run the file. I use it also for more VDISKs at one time creation. But be always very careful!

Mike
...and I think to myself, what a wonderful world ;o)