I have an EVA5000 with the HSV110. 1 of my HSV100 will not boot. I can get the the amber light with Boot diagnostics, Ram Test Passed screen but nothing else. My other HSV100 booting and runs with no issues. Please advise.
During controller boot, it does several tests, they appear on the display as TE XX. Try to note the messages that appear on the display during the boot sequence. Also, try to get controller event log from Command View.
The EVA is under warranty? Because the logical thing here is replacing the controller. An HP CE can go there, connect to the serial port on the controller, get boot logs and send them to the dev team to be analyzed, but it's not worth the trouble in this case. This is usually done only when both controllers do not boot (hint: do not use 100% of space on a EVA with firmware 6.000)
I believe it is out of warranty. The dilemma I am facing that I have about 8TB of space on my EVA and if it will be more cost effective to have HP come and repair or replace it or buy a much smaller storage solution with similar or greater storage capacity. It is strictly for storage and the speeds of the drives are not as much of an issue. I am tempted to get a SATA rack with a bunch of 750GB or 1TB drives. Smaller, quieter & use less electricity than this monster I have. It also might be less of a headache. Any suggestions?
Well, an EVA provides you more functionality than just a lot of space. But if you only need a lot of TB, then you can switch to a MSA1500 (Up to 64 TB with 750 GB SATA disks.
