EVA8000_Host_Speed.

[WW316110]

We have EVA8000 with 19 Encloser (Disk, Controller).
But the Host Port speed set as 2GB in both the side EVA Host port side and Brocade Switch (Brocade 48000). which will support up to 4 GB.
can any one tell me my EVA 8000 will support 4GB Host port..

[JKytsi]

Yes it will.

[Johan Guldmyr]

I suppose you might need 4GB sfps as well.

[Uwe Zessin · Accepted solution]

It depends on the model. The first-generation EVA8000 was limited to 2 GigaBit.

[WW316110]

Please find my EVA model No and advice me if my EVA Box will support 4GB. If you want more information please let me know..

Identification:
==============
Name :UpperController A
Type :EVA Storage System
Manufacturer :Hewlett-Packard
Model Number :HSV210
Software Version:CR0ECAxcsp-6110

[Uwe Zessin]

Is this HSV210 or HSV210-A?

[WW316110]

Its HSV210 only.

[Uwe Zessin]

Did you look at the front bezel?
If it says HSV210, then it is 2 GigaBit.

[WW316110]

I am in different location i can not see, Is there any other way to identify..?

[Uwe Zessin]

Yes, by the serial number of the controller module (Psomething)

[WW316110]

Yes it starts with P and I got the information form Controller Properties.

Will it support 4GB Pls confirm..

Serial Number: P8398F2AARW0XXX

[Uwe Zessin]

Sorry, "8398" it is the first-generation EVA-8000 controller, part number 390855-001, which is limited to 2 GigaBit/sec.

[WW316110]

Thanks for Your reply and can U tell me what is part no and where to check in Command View EVA?