Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA8100 Active/Passive

Hasan_9
Regular Advisor

EVA8100 Active/Passive

Hello,

I want to configure my EVA8100 in Active/Passive mode. What should I do? What version of XCS support A/P on EVA8100?

Please advice.
hasan
3 REPLIES
Torsten.
Acclaimed Contributor

Re: EVA8100 Active/Passive

Why?

This array is a/a.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Patrick Terlisten
Honored Contributor

Re: EVA8100 Active/Passive

Hello,

IMHO is there no way to configure an EVA this way. EVA mit XCS is always A/A. Only EVA 3000 and 5000 with VCS <4.x are A/P.

Hope this helps,
Patrick
Best regards,
Patrick
Tony Valentim
Occasional Advisor

Re: EVA8100 Active/Passive

Don't understand why you would want to do that, but you simulate that using MPIO by forcing a perferred path.

The 4x00/6x00/8x000 are active/active that's it