Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA8100 & Novell Netware native multipath

mikkoss
Occasional Visitor

EVA8100 & Novell Netware native multipath

Hi,

I have few Novell Netware 6.5 hosts in my SAN environment. Currently we are using Netware native multipahing with following config (boot from the SAN):
set multi-path support=on
load scsihd.cdm /AEN /DEBUG /RETRIES=10

load ql2x00.ham slot=101 /LUNS /ALLPATHS /PORTNAMES /CONSOLE
load ql2x00.ham slot=102 /LUNS /ALLPATHS /PORTNAMES /CONSOLE

When I had to reboot Master controller in EVA all netware hosts died. Does anyone have working multipath config what to use with netware? I could not find any HP docs on how to adjust netware setting for multipathing.

regards
Mikko
1 REPLY
IBaltay
Honored Contributor

Re: EVA8100 & Novell Netware native multipath

Hi,
some usefull info could be found here in
Novell NetWare SAN rules of the SAN design guide:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00403562/c00403562.pdf?jumpid=reg_R1002_USEN
the pain is one part of the reality