Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Error in Raid Manager

hboo
Frequent Advisor

Error in Raid Manager

Hello all

I have an error when I tried to start a bussines copy instance (in XP12000), when execute horcmstart script the output is:

*****************************************************************************

- HORCM STARTUP LOG - Mon Jul 9 15:17:03 2007

*****************************************************************************

15:17:03-8f428-01373- horcmgr started on Mon Jul 9 15:17:03 2007

15:17:03-9272a-01373- execvp() horcmd_03 using /etc/horcmgr [CWD=/]

15:17:03-987bd-01374- Fibre address conversion TBL has been set to '4'



P.P. : Raid Manager XP for HP-UX

Model : Raid-Manager-XP/HP-UX

Ver&Rev: 01.17.04

Release: Production



(C) Copyright 1999-2005 Hewlett-Packard Co., All Rights Reserved



HORCM(sirveq02 1374) started by root (0) on Mon Jul 9 15:17:03 2007



15:17:03-af7d1-01374- horcmd_03 started on Mon Jul 9 15:17:03 2007

15:17:03-b28e9-01374- [horcmcfgrdf] access(conf_file) OK.

15:17:03-b55a3-01374- [horcmcfgrdf] access(check) OK.

15:17:03-b8498-01374- [horcmcfgrdf] open(conf_file) OK.

15:17:03-bb84a-01374- ERROR: A wrong ipaddr or servicename line exists in HORCM_MON: line 13

15:17:03-be228-01374- sirveq02 horcm3 1000 3000

15:17:03-c1122-01374- [horcmcfgrdf] close(conf_file) OK.

15:17:03-bb84a-01374- ERROR: A wrong ipaddr or servicename line exists in HORCM_MON: line 13

15:17:03-be228-01374- sirveq02 horcm3 1000 3000

15:17:03-c1122-01374- [horcmcfgrdf] close(conf_file) OK.

15:17:03-c3fed-01374- ERROR:horcm_cfg_create

15:17:08-b8db1-01373- horcmgr:Failed to connect to HORCM.

But horcm3.con file is good:

HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
sirveq02 horcm3 1000 3000

HORCM_CMD
#dev_name dev_name dev_name
/dev/rdsk/c41t15d7

HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
VGQ2 disk00 CL1-A 0 4 1
VGQ2 disk01 CL1-A 0 5 1
VGQ2 disk02 CL1-A 0 6 1
VGQ2 disk03 CL1-A 0 7 1
VGQ2 disk04 CL1-A 0 3 1
VGQ2 disk05 CL1-A 1 4 1


HORCM_INST
#dev_group ip_address service
VGQ2 sirvep00 horcm3


Somebody can help me please?

Thanks

1 REPLY
Nigel Poulton
Respected Contributor

Re: Error in Raid Manager

Hayse,

Try it changing the HORCM_MON section to the following -

NONE horcm3 1000 3000

Using the NONE option will allow HORCM to bind to any NIC on your system. You may not want to allow this, but just try it. If this works then the problem is likely because your server is unable to resolve sirveq02 to a valid IP address/NIC

HTH
Talk about the XP and EVA @ http://blog.nigelpoulton.com