HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Eva Perf on host Ports

 
Rohit Kassen
Occasional Advisor

Eva Perf on host Ports

I done some eva perf on host port on the EVA 8000 controllers, i have noticed that majority of req are pushed through FP3 on one controller is normal or is the balance incorrect. Secondly has the latest EVA firmware (XCS 6.0) addressed the 2TB lun limitation.

Regards
Rohit
4 REPLIES
Pshedges
Trusted Contributor

Re: Eva Perf on host Ports

From all the information I have recieved from HP there is no mention of the 2TB LUN limit being addressed.

Issues addressed and enhancements are Security, Local and Remote Replication,GUI Enhancements, Drive Code Load enhancments, array password enhancements and a master installer.

Re: Eva Perf on host Ports

please contact your HP storage specialist. they may be able to give you some info on current plans in that area, as long as you have an NDA in place.
Rohit Kassen
Occasional Advisor

Re: Eva Perf on host Ports

Thnks for 2TB info, has any managed to look at the logs from eva perf on host ports
Rohit Kassen
Occasional Advisor

Re: Eva Perf on host Ports

no comments on logs