Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

FC10 Array event Notification #101

al-niz
Occasional Contributor

FC10 Array event Notification #101

I have a rp5470 and received the attached notification. An ioscan list path 0/12/0/0.8.0.255.0.10 for tgt and sctl as NO_HW
Attached is the STM log. I am not sure if I am having a problem with the controller or the gbics.
1 REPLY
Torsten.
Acclaimed Contributor

Re: FC10 Array event Notification #101

See

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1238739

Both chassis controllers are OK, ctrl B has lost the link - so it could be the gbic, the cable or even the HBA.


Your diagnostic version is from march 2002!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!