Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

FC60: no arrays were found by the AM60Srvr

Anthony_4
Advisor

FC60: no arrays were found by the AM60Srvr

It's a new installation. we have 2 FC card on V2250 connecting to FC60 with 2 SP.
After powerup, ioscan shows CLAIMED for the A5277A FC60 and diskinfo can also show configured LUN information. but amdsp -R/amdsp -i shows"no arrays were found by the AM60Srvr". therefore I cannot configure the FC60.
How can I correct this problem?
Tony
4 REPLIES
Paul McCleary
Honored Contributor

Re: FC60: no arrays were found by the AM60Srvr

Check that the ARMServer is running. Just do a ps -ef|grep on it. If not start it up and away you go.

HTH, Paul
Frank Skibbe
Advisor

Re: FC60: no arrays were found by the AM60Srvr

Try to rescan the arrays with the amdsp -R
regards

Frank
Insu Kim
Honored Contributor

Re: FC60: no arrays were found by the AM60Srvr

Check that AM60Srvr is running.
If it's not, run it manually.
# /opt/hparray/bin/AM60Srvr
# amdsp -R

Now see AM60Srvr is running in the backgroung.
If it's there, It works.
Never say "no" first.
Bob Inglis
Trusted Contributor

Re: FC60: no arrays were found by the AM60Srvr

Make sure you have the latest AM60 server patch installed. There have been so many changes it is critical that the AM60server be the latest revision.
Plan for the future and tomorrow will take care of itself.