HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Ghosting ML570 w/6404 Controller

 
Andrew S
Occasional Visitor

Ghosting ML570 w/6404 Controller

Trying to ghost a ML570 with a 6404 array controller without success. I am using Symantec 8 and 3Com PXE/TFTP. The DOS ASPI drivers supplied by HP site will not load in memory. Is the only solution is to create a boot floopy? Thanks.
2 REPLIES
Tim Jorgenson
Occasional Visitor

Re: Ghosting ML570 w/6404 Controller

Have you had any luck yet? I am almost in the same boat on this one. I will post what I find if I solve the mystery.
Sincerely,
Tim J.
Mynor Aguilar
Valued Contributor

Re: Ghosting ML570 w/6404 Controller

Try using Symantec Executive Recovery for servers. It works really good, even for restoring on dissimilar hardware.

Regards,
Mynor Aguilar