Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

HP MSA2312i G2 + HP P2000 G3 Enclosure - Does it work?

Gulian
Occasional Visitor

HP MSA2312i G2 + HP P2000 G3 Enclosure - Does it work?

Hello.

 

I have a MSA 2312i G2 SAS iSCSI Enclosure with 2 Controllers. It works perfectly. 

One day we bought a additionaly Enclosure with the name HP P2000 G3 SAS

I connected the new Enclosure to the existing MSA 2312i G2... It shows me the P2000 G3 Enclosure, but

without a wrong physical overwien in the webinterface. Our additionaly Enclosure has only 12 Slots and not 24.

I could configure it without problems, but i don't know if i can use it now for the productiv environment.

I tried at first to upgrade the firmware.. The existing firmware from the Expansions Modules (EMPs) of the P2000 G3 was newer as this, that i used for the upgrade.

 

Before that: Revision 1130

Now: Revision 1056 :-(

 

But it could not resolve my existing problem. It shows my 24 Slots instead of existing 12 Slots :-(

HP says that it is not compatible with the MSA 2312i G2... But it works...

 

Can someone help me?

And i can't find the storage firmware with the Revision 1130 :-(

Have someone a special link for it?

 

Thank you 

 

 
1 REPLY
John Kufrovich
Honored Contributor

Re: HP MSA2312i G2 + HP P2000 G3 Enclosure - Does it work?

The MSA P2000 jbod shelf is not supported on a G1 or G2 array. 

 

For the G2 arrays, the only options are MSA70 for SFF drives and MSA2000 jbod for LFF drives.