Disk Enclosures
1748288 Members
3511 Online
108761 Solutions
New Discussion юеВ

HP Model 10 disk array error code

 
JOHN TURNER_2
Frequent Advisor

HP Model 10 disk array error code

good afternoon

i have just recieved a hP model 10 disk array, and when it boots up it get's to letter T on the POST section and then hangs and displays the following error / information code 0001007f

can anyone shed some light on this

Cheers in advance

John
GUI's are for wimps!
3 REPLIES 3
goldboy
Trusted Contributor

Re: HP Model 10 disk array error code

John,
I could not find that error/information code in the list.
any other error codes ?

T
"Life is what you make out of them!"
JOHN TURNER_2
Frequent Advisor

Re: HP Model 10 disk array error code

no thats it, unfortunately, we do only have 2 disks installed in the array, and we dont have a flash disk, as we are going to be sending it out to a customer. Could that be the problem

GUI's are for wimps!
goldboy
Trusted Contributor

Re: HP Model 10 disk array error code


There is a min of 3 disks required in the Mod10.
make sure to put them togther (controller A is the first 5 slots and B is the last 5 slots)

T
"Life is what you make out of them!"