HPE Community
Disk Enclosures
1753375 Members
5360 Online
108792 Solutions
New Discussion

Re: HP NetRaid -1M Problem

 
Abed Barakat
New Member

‎04-03-2007 10:53 PM

‎04-03-2007 10:53 PM

HP NetRaid -1M Problem

we have HP NetRaid -1M with 4 hardisks
the raid fails and we tried to rebuild the raid and it done successfully, but we can't see the data.
we added separate hardisk to the same server and we see the raid but the data seems to be currupted.
is there is any way or utility to restore the data
0 Kudos
Reply
1 REPLY 1
e4services
Honored Contributor

‎04-05-2007 02:35 AM

‎04-05-2007 02:35 AM

Re: HP NetRaid -1M Problem

Ouch. What exactly happened to cause the RAID to "fail"? That is, how did you know and what were the indications?
Were there lights on the drives blinking?
Did you loose the ability to read the logical drives on the RAID?
Without knowing it sounds as if 1 drive failed and then another after that.
Hot Swap Hard Drives
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.