Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

HP StorageWorks Command View EVA v 9.x.0

SOLVED
Go to solution
AngelOK
Advisor

HP StorageWorks Command View EVA v 9.x.0

Could any body tell me, where can I download software HP SW Command View EVA v 9.0.0 or v 9.2.0?
I found just a patch 9.2.1, but:
You must have HP Command View EVA 9.2 installed and configured before you can install HP Command View EVA 9.2.1.
8 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: HP StorageWorks Command View EVA v 9.x.0

Current version 9.3:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=CommandViewEVA9.3

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AngelOK
Advisor

Re: HP StorageWorks Command View EVA v 9.x.0

Thanks.
I have two question about version 9.3:
1. Can I upgrade to version 9.3 from my current version 8.0?
2. Note: If you use Continuous Access ("CA") with EVA, please contact your local HP Services representative to received XCS v9534000.
I'm using CA, can I use this 9.3 release?
Torsten.
Acclaimed Contributor

Re: HP StorageWorks Command View EVA v 9.x.0

Except the patch version an upgrade always means deinstallation of the old version, reboot and install the newer version.

Save your licenses just in case ...


What EVA model do you have?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AngelOK
Advisor

Re: HP StorageWorks Command View EVA v 9.x.0

We have EVA 8100 model.
Torsten.
Acclaimed Contributor

Re: HP StorageWorks Command View EVA v 9.x.0

XCS v9534000 is firmware for EVA x400 models only.

Just follow the instructions and release notes of the current command view version.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AngelOK
Advisor

Re: HP StorageWorks Command View EVA v 9.x.0

Am I correct:
I receive 9.3 version that you give me & can install on my server, then install license and also be used as it is now?
Torsten.
Acclaimed Contributor

Re: HP StorageWorks Command View EVA v 9.x.0

What version is currently running?

If it is >= version 7; you just uninstall this version, reboot the server and install 9.3.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AngelOK
Advisor

Re: HP StorageWorks Command View EVA v 9.x.0

Thanks.