HP Sure Store SC10

[Shawn Patterson]

Hello,

I have a customer who currently has a A3511A FC Multiplexer with a Mod12 connected to it. He wants to know if he can hook up his SC10 to the multiplexer in place of the Mod12? And if so, are there any special types of cables or terminators that will be needed? I have tried to find the answer with no success. Any help would be greatly appreciated. Thanks in advance!

[Bob Inglis · Accepted solution]

Sorry, No. (Apples and Oranges)

The fc-scsi bridge is Fast Wide Differential SCSI-2.

The SC10 is Low Voltage Differential SCSI-3

[Bill McNAMARA_1]

But there is a Forerunner 2/1 2LVD and 1FC
that should work.
I believe its only supported with the libraries
though.

Later,
Bill

[Bill McNAMARA_1]

Here's a pdf describing the 2/1 and the 4/1
I mentioned in the earlier post.

Later,
Bill

[Bill McNAMARA_1]

Well the zip doesn't work so here's a link

http://www.storage.hp.com/san/scsibridges/index.html

[Shawn Patterson]

Hello again,

[Shawn Patterson]

Hello again,

Thanks for the replies gentlemen, with your help I was again to take care of my customer. Thanks again for the assistance!

Shawn