Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

HP VA7100 DISK ARRAY ALL DISK AMBER LIGHT BLINKING

Vijay_52
Occasional Visitor

HP VA7100 DISK ARRAY ALL DISK AMBER LIGHT BLINKING

Hi Everyone..

We have L1000 Server with VA7100 Virtual Array with Single Contoller. Recently Controller Failed and We replaced with New Controller. After Replaing the controller All the Luns are Ok and we are able to Mount and use the Luns. But All the (Array is having 6 disks ) Disks AMBER light is flashing. Green Light is bliking whenever Activity is There..Array status is Ready and there is no warning. Out put of armcfg -s armcfg -d is attached here with. Pls help me..how to disable the LED flashing on disks.
1 REPLY
Hoang Chi Cong_1
Honored Contributor

Re: HP VA7100 DISK ARRAY ALL DISK AMBER LIGHT BLINKING

Hm...your attached file....I can read because it in hexa format!
As my experience, you have to reboot again the VA. If you replace disk it is no need to reboot but if you replace new Controller you must to reboot after the first time coming up.
Because for the first time it comes up with the new Controller, it will rebuild the VA and all information.

Goodluck to you.

Looking for a special chance.......