Disk Enclosures
1748157 Members
4124 Online
108758 Solutions
New Discussion

HP specific classes defined in the namespace of SMI-S 1.2 provider for HPEVA 8.0.1

 
Illusionist
New Member

HP specific classes defined in the namespace of SMI-S 1.2 provider for HPEVA 8.0.1

How to get the documentation of HP specific classes defined in the namespace of SMI-S 1.2 provider for HPEVA 8.0.1?
1 REPLY 1
Mariano_6
Occasional Advisor

Re: HP specific classes defined in the namespace of SMI-S 1.2 provider for HPEVA 8.0.1

If there is a document similar to this

SMI-S provider troubleshooting
for HP Systems Insight Manager and
HP Storage Essentials
Fourth edition: January 2008

...
Default namespace

The default for most HP arrays is root, with the
following exceptions:
HP arrays
â ¢ If you are running Command View EVA, the default namespace is root/pg_interop.

(8.0.1 ...-> interop)

â ¢ If you are running Command View XP Advanced Edition 5.0, the namespace is root/hitachi/dm50.
â ¢ If you are running Command View XP Advanced Edition 5.1, the namespace is root/hitachi/dm51.

Emulex HBAs-> root/emulex

HP-UX HBAs-> root/cimv2

QLogic HBAs-> root/qlogic

Brocade switches-> interop

Cisco switches-> root/cimv2

HP switches->interop or root/cimv2 depending on the switch model

McData switches-> interop

HP StorageWorks
Enterprise
tape libraries -> Systemsroot/pg_interop

...