HP3000 and AUTORAID

[Farhad Hedjazian]

If You are using the HP product E DISK ARRAY 12 H
on a HP3000 please let me Know about your
experince
I am planning to implement this solution on two
HP979
For the moement HP France are unable to privde me
with information based on a production SITE
their only information is from LABO

P.S. This thread has been moved from General to Disk Array. - Hp Forum moderator

[Steve White_8]

Hi,

I have worked with the AutoRaid Model 12 & 12H. The environment that I have
worked on is the HP9000/ series 800 but what you would do would be the same.

I can't answer your questions because you did not provide me with any details
on your environmant. What application are you running, how much disk space do
you need, how many hard disks in each autoraid and what size of disk are you
using, how many SCSI controllers are you using.

Steve

[SILVERSTAR]

Hi,

for sure, from February, you got some answer from HP but, in any case, I can tell you that we work from two months with an AutoRaid and a HP3000-979/200 running MPE 6.0 PP2. For our purpose it work well as boot and data disc. The only suggestions are: live, as much as possible, the array in RAID1 and, for the HP3000, don't take care about the secondary processor (it can be useful with a next release / patch of the OS with the high availability fail over (HFO)).

Regards
Enrico