HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

HSG80 Hardware Versions

 
Mike Povall
Trusted Contributor

HSG80 Hardware Versions

Does anyone know if there are any requirements for the hardware version of an HSG80 controller to be the same as its partner in an M2200 chassis? The chassis that I am looking at currently has one controller at E09 and the other at E14. If they do need to be the same is there a process to upgrade the controller?

Thanks in anticipation of your responses.
2 REPLIES
Rob Leadbeater
Honored Contributor

Re: HSG80 Hardware Versions

Hi Mike,

The maintenance and servic guide here:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00309754/c00309754.pdf

states: "The replacement controller hardware must be compatible with the remaining controller hardware. Refer to product specific release notes and documentation for information regarding hardware compatibility."

However I can't find any details about the specifics...

I'm fairly certain that I've run a HSG80 in the past with the controllers at different hardware revisions, without any issues.

As far as I'm aware there isn't any way to upgrade a controller to get to a different hardware version.

It is important however to make sure both controllers are running the same version of ACS.

Hope this helps,

Regards,

Rob
Mike Povall
Trusted Contributor

Re: HSG80 Hardware Versions

closed by author