HPE Community
Disk Enclosures
1752794 Members
6529 Online
108789 Solutions
New Discussion юеВ

Re: Help turn the lights on (Storage Works)

 
Toby Ragsdale
Frequent Advisor

тАО07-19-2006 09:06 AM

тАО07-19-2006 09:06 AM

Help turn the lights on (Storage Works)

.
I installed a new rp3440 with a StorageWorks MSA 30 SB, and everything is working nicely now. Its just about to go into production, and the CEO stop by. I showed him the new box while we were talking, and he asked, why aren't the lights on the drive lit. The new server is tucked between two racks of DL380s with lights a blinking. The MSA drive lights blink on access, but are NOT on constantly. This seems a peaty complaint until you take into consideration the PR effect of the server room. It is infact a stop on the tour for new reps etc., and his complaint is valid. It "looks wrong".

Sooo... Can anyone turn the lights on?

Thanks
TBR
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО07-19-2006 09:11 AM

тАО07-19-2006 09:11 AM

Re: Help turn the lights on (Storage Works)

Is the box connected to a "normal" scsi HBA or a smartarray controller?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Toby Ragsdale
Frequent Advisor

тАО07-19-2006 09:14 AM

тАО07-19-2006 09:14 AM

Re: Help turn the lights on (Storage Works)

"Normal" scsi
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.