Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Help with SC10 connection

Krish_4
Contributor

Help with SC10 connection

Hi,

We want to connect SC10(single bus mode) disk system to A500 hardware. How should be the connection made? A500 has just one scsi port. SC10 has 4 scsi ports. How about the termination? Any help is appreciated.

Thanks.
1 REPLY
Adisuria Wangsadinata_1
Honored Contributor

Re: Help with SC10 connection

Hi Krish,

You can connect the SCSI cable from A500 SCSI port (LVD) to one of the SCSI port on BCC A (Bus Controller Card). And the other port on BCC A with terminator. The maximum cable is 12 meters.

This configuration will make a single bus mode with non-redundant features.

Hope this information can help you.

Cheers,
Adisuria Wangsadinata
now working, next not working ... that's unix