Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Host mode for Windows 2008 on XP20000 and XP24000

George Denyer_1
Frequent Advisor

Host mode for Windows 2008 on XP20000 and XP24000

Can anybody tell me if there is a host mode on XP for Windows 2008 other than the 0x0C and 0x2C host modes used for other versions of Windows?

The reason I ask is I'm getting an error from Cluster Validation Wizard saying "Cluster Disk N does not support Persistent Reservations" for every volume. I've seen this happen on EVA before and the reason has allways been the host mode assigned to the host was Windows instead of Windows 2008.
2 REPLIES
Torsten.
Acclaimed Contributor

Re: Host mode for Windows 2008 on XP20000 and XP24000

Helpful?

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=3418595&prodTypeId=12169&objectID=c01847587

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
George Denyer_1
Frequent Advisor

Re: Host mode for Windows 2008 on XP20000 and XP24000

Hi Torsten, thanks for the link.

I saw that document before and ended up confused because while it mentions host modes 0x0C and 0x2C, which are the same used for previous versions of Windows, it also mentions a host mode specific for Windows 2008 which might not be available on some versions of Command View (same thing that happens with EVA).

As I dont have Command View, only Remote Web Console, I cant check what the document suggests.