HPE Community
Disk Enclosures
1752782 Members
6209 Online
108789 Solutions
New Discussion

How do I configure a new SATA disk on a HP Proliant ML150

 
David_pe
New Member

‎12-17-2005 04:08 AM

‎12-17-2005 04:08 AM

How do I configure a new SATA disk on a HP Proliant ML150

HI everybody I'm new on using HP Proliant servers, I have bought a new one and I'm configuring it, I have installed two SATA hot plug disks and now I want to install the OS but doesn't recognize any HD, how do I configure them, to make the MB recognize them, thanks a lot, bye.

David
0 Kudos
Reply
1 REPLY 1
Leon Rosier
Respected Contributor

‎12-18-2005 12:11 AM

‎12-18-2005 12:11 AM

Re: How do I configure a new SATA disk on a HP Proliant ML150

I guess you have the 6-port SATA raid controller installed? If so, during start up press F9 to go into setup and set the bootcontroller order.
After this is done, during reboot press Ctrl-A to enter the raid utility and here you can configure the logical drives.

Gr, Leon
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.