Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

How to config MSA 500 G2 external boot?

Ryan Gu
Frequent Advisor

How to config MSA 500 G2 external boot?

I have a MSA500 G2 with a High Availability Kit and a 4-ports connector.

Three DL380G4 will be connected to MSA 500 G2. SSP should be configed.

I want to boot from MSA, but I have no experience about it. How can I do?
Ryan Gu
3 REPLIES
Jefferson Humber
Honored Contributor

Re: How to config MSA 500 G2 external boot?

Jason,

Have you had a look at this ?

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00182786/c00182786.pdf

Jeff
I like a clean bowl & Never go with the zero
Ryan Gu
Frequent Advisor

Re: How to config MSA 500 G2 external boot?

I have finished that job.

The installation steps is same as install on local SCSI disk.
Ryan Gu
pccbryan
Occasional Visitor

Re: How to config MSA 500 G2 external boot?

I see in the documentation it discusses where the boot and data locations reside. I do not see an example where the boot location=storage and data location=server. We have a server that boots from the MSA500 but needs to be able to access the drives on the front of the server for data use. The drives show up in ACU but do not show up in Microsoft Server disk management.