Disk Enclosures
1748180 Members
4258 Online
108759 Solutions
New Discussion юеВ

How to connect the VA7110 after installing new OS?

 

How to connect the VA7110 after installing new OS?

Hi~
The rp4440 server is connecting the VA7110 array.
The OS of rp4440 server was crashed.
So, Our client want to reinstall the same of OS verion(11i).
VA7110 array remain the data.
I keep with older configuration (LUN Info etc).
How to connect the va7110 after installing the new OS?
Any good method?
2 REPLIES 2
Nguyen Anh Tien
Honored Contributor

Re: How to connect the VA7110 after installing new OS?

1, Do you have any Ignite backup tape? if Yes pls recover OS from it.
2, If ignite tape is not available, try to find any vgmap (out put of vgexport command). Reistall fresh OS and use vgimport to import all vg configuration!.
3, if Both of them are not availble do as following:
1) Create a new volume group:
mkdir /dev/vgnew
mknod /dev/vgnew/group c 64 0x020000

2) Import the disks into the new volume group.
vgimport /dev/vgnew /dev/dsk/c5t0d7

4) Activate the new volume group.
vgchange -a y /dev/vgnew

5) Mount the associated LVols.
mkdir /snap/lvol1
mount /dev/vgnewlvol1 /snap/lvol1
HP is simple

Re: How to connect the VA7110 after installing new OS?

It is possible to login the OS.
Now, vgexport command available.
But, where is restore the LUN information?