Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

How to setup MSA30 on HP-UX

SOLVED
Go to solution
cam9269
Regular Advisor

How to setup MSA30 on HP-UX

Good day Gurus!

I would like to seek assistance in setting up 2 X MSA30 Dual Bus disk enclosures on an RP4440.

The procedures I need are the following:
1. Cabling
2. RAID setup and sparing
3. Other things I need to setup either on the storage or the server to obtain optimal performance from my storage.

TIA!
6 REPLIES
Torsten.
Acclaimed Contributor

Re: How to setup MSA30 on HP-UX

Do you have a smartarray controller or just "plain" SCSI controllers?
This is important for the next steps.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: How to setup MSA30 on HP-UX

Do you have a smartarray controller or just "plain" SCSI controllers?
This is important for the next steps.

If this is "plain" SCSI, do you want to mirror the disks? How many disks are there?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
cam9269
Regular Advisor

Re: How to setup MSA30 on HP-UX

Hi Torsten,

I only have plain SCSI controllers.
I have 8 x 72GB HDD to plug into an MSA30-DB

Best Regards
cam9269
Regular Advisor

Re: How to setup MSA30 on HP-UX

Oh and I want to have it mirrored.
Torsten.
Acclaimed Contributor
Solution

Re: How to setup MSA30 on HP-UX

Connect each SCSI controller to a connector of the DB module. Put 4 disks in the left half of the MSA, 4 in the right half.

Start your server and you will find new device files for the disks.

Use this documentation to create a volume group and logical volumes and a mirror:

http://docs.hp.com/en/B2355-90950/ch06s02.html#cdebgaei

Come back, if you have more questions.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
cam9269
Regular Advisor

Re: How to setup MSA30 on HP-UX

Thanks for all the information Torsten! Will try these procedures out and give feedback on how it goes..