Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

How to use EVA DCM

SOLVED
Go to solution

How to use EVA DCM

I have EVA4400 with CV/BV/DCM unlimited licenses.

I have installed all the software and applied all the licenses. I can't see how I can use DCM in CVor RSM to resize the LUN.

Does somebody knows where I can find document that will show how to use DCM. On HP site I was able to find a lot of information about what DCM should do but I was unable to find any document showig how to acctually use it.

6 REPLIES
Sandeep Harikantar
Occasional Visitor

Re: How to use EVA DCM

DCM license will be installed while installing DCM software

below steps to check the license status.

1)Browse to HP Replication Solutions Manager.

2)Perform a global refresh by clicking the Refresh icon under Tools and then click Close in the Global Refresh Monitor window.

3)Select Storage Systems and then select the correct array.

4)Select Actions > View Properties > Licenses to view the license.

Re: How to use EVA DCM

Hi Sandeep,

Thank you for your responce. I was able to see DCM license in RSM software. I was looking for any documentation on how to use or configure DCM.

cnb
Honored Contributor

Re: How to use EVA DCM

Uwe Zessin
Honored Contributor
Solution

Re: How to use EVA DCM

A quick look into the bits which are called the "RSM documentation" did not reveal anything useful (no surprise...)

However, I've seen a document that seems to give better help although the title might be a bit misleading:

- Dynamic capacity management for SQL Server databases on HP Enterprise Virtual Array technical white paper

http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4AA2-7142ENW
.

Re: How to use EVA DCM

Hi Uwe,

This is exactly what I needed. Thanks for your help.

Re: How to use EVA DCM

Thnaks Uwe.