Identifying the controller

[Ayman Altounji]

We have an array controller with the following part number on it - SP# 295243-001, can anyone help in identifying what it is and what SCSI formats it supports.

[Ayman Altounji]

SMART-2DH Array Controller
Support for RAID 0, 1, 4, and 5 fault tolerance options
Online capacity expansion
Supports Wide-Ultra SCSI; a 16-bit, 20-MHz bus providing a 40-Mbytes/sec data transfer rate
Support for Wide-Ultra SCSI, Fast-Wide SCSI-2, and Fast-SCSI-2
hard drives
Dual channels on a single board to support up to 14 drives (7 per channel)
[up to 14 per channel with firmware 3.08 and greater]
Wide-Ultra SCSI/Fast-SCSI-2 (Wide SCSI) internal connector
Wide-Ultra SCSI/Fast-SCSI-2 (Wide SCSI) external connector
Removable Array Accelerator - battery-backed 16-MB Read/Write Cache with ECC (Error Checking and Correcting) memory
Performance monitoring through Compaq Insight Manager
Automatic performance tuning
Pre-failure notification
Read-ahead caching
Tagged command queuing
Multiple logical drives per drive array
Support for drive and array movement
Available in 32-bit PCI Bus Master interface