HPE Community
Disk Enclosures
1752808 Members
6128 Online
108789 Solutions
New Discussion

Identifying the controller

 
Ayman Altounji
Valued Contributor

‎04-19-2001 04:00 PM

‎04-19-2001 04:00 PM

Identifying the controller

We have an array controller with the following part number on it - SP# 295243-001, can anyone help in identifying what it is and what SCSI formats it supports.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎04-19-2001 04:00 PM

‎04-19-2001 04:00 PM

Re: Identifying the controller

SMART-2DH Array Controller
Support for RAID 0, 1, 4, and 5 fault tolerance options
Online capacity expansion
Supports Wide-Ultra SCSI; a 16-bit, 20-MHz bus providing a 40-Mbytes/sec data transfer rate
Support for Wide-Ultra SCSI, Fast-Wide SCSI-2, and Fast-SCSI-2
hard drives
Dual channels on a single board to support up to 14 drives (7 per channel)
[up to 14 per channel with firmware 3.08 and greater]
Wide-Ultra SCSI/Fast-SCSI-2 (Wide SCSI) internal connector
Wide-Ultra SCSI/Fast-SCSI-2 (Wide SCSI) external connector
Removable Array Accelerator - battery-backed 16-MB Read/Write Cache with ECC (Error Checking and Correcting) memory
Performance monitoring through Compaq Insight Manager
Automatic performance tuning
Pre-failure notification
Read-ahead caching
Tagged command queuing
Multiple logical drives per drive array
Support for drive and array movement
Available in 32-bit PCI Bus Master interface
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.