1748269 Members
3642 Online
108760 Solutions
New Discussion

Re: Install

 
Ayman Altounji
Valued Contributor

Install

We're setting up two 18gb drives on a 431 controller in a Compaq 1600 server and will be moving the drives and controller to an ML350. This will replace the existing drives and controller in the server. Apart from making sure the frimware is up to date, anything else we should be aware of?

Thanks
1 REPLY 1
Mark Cloutier
Respected Contributor

Re: Install

There is nothing that needs to be done. You might want to go into the BIOS and set the boot order.
We are here for a good time, not a long time!