Disk Enclosures
1748250 Members
3428 Online
108760 Solutions
New Discussion юеВ

Installing Command View EVA 9 EVA4100

 
SOLVED
Go to solution
JuanCG
Super Advisor

Installing Command View EVA 9 EVA4100

Best of all, I have an EVA4100 and I need to install the Command View EVA 9, where I can see if it is compatible with the firmware of my holding and procedure.

Thank you
8 REPLIES 8
Niels Vejrup Pedersen
Respected Contributor

Re: Installing Command View EVA 9 EVA4100

Hello,

Command View 9.0.1 are compatible with these versions:

VCS 3.1xx
VCS 4.1xx
XCS 6.1xx (HP Recommends Upgrade to 6.2xx)
XCS 6.2xx
XCS 09003000
XCS 09006000
XCS 09501x00

Regards,
JuanCG
Super Advisor

Re: Installing Command View EVA 9 EVA4100

Thank you very much for an answer, I can tell that you get this document? I need to submit a paper or an official HP website.

Thank you
Niels Vejrup Pedersen
Respected Contributor
Solution

Re: Installing Command View EVA 9 EVA4100

Hello,

Yes - these are numbers from the EVA Compatibility Matrix.

If you have access to SPOCK you can get it there.

www.hp.com/storage/spock

Regards,
Jozef_Novak
Respected Contributor

Re: Installing Command View EVA 9 EVA4100

Scorpianzzz
Advisor

Re: Installing Command View EVA 9 EVA4100

Please go through the release notes of the CVEVA 9.

All the required information is provided in it.


Athome
Advisor

Re: Installing Command View EVA 9 EVA4100

Hi!

I have a question on this issue;
Is it possible to install CV 9 and upgrade from XCS 5.1xx to 6.1xx?
JuanCG
Super Advisor

Re: Installing Command View EVA 9 EVA4100

Good again, the firmware of the EVA is 5110 and the document HP StorageWorks Enterprise Virtual Array compatibility reference is not the command View 9, so if I can not install it or not.

I can indicate a more recent documents?

You really can install this on the EVA?
Greetings
JuanCG
Super Advisor

Re: Installing Command View EVA 9 EVA4100

Thanks