Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Instructions on upgrading F/W on SAN 1500MSA CS System

Juan Carlos Olaya
Occasional Contributor

Instructions on upgrading F/W on SAN 1500MSA CS System

Hello,
where can I find instructions on upgrading firmware on a SAN 1500MSA CS Server? A link to instruction or a place where I can get them will be much appreciated.
Thank you,
JCO
4 REPLIES
IBaltay
Honored Contributor

Re: Instructions on upgrading F/W on SAN 1500MSA CS System

Wickedsunny
Valued Contributor

Re: Instructions on upgrading F/W on SAN 1500MSA CS System

If you have a windows host which can see the MSA 1500 connected to the MSA, then the best way would be to download the MSA Flash firmware utility from the following link:-

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=415600&prodTypeId=12169&prodSeriesId=415598&swLang=8&taskId=135&swEnvOID=1005#290

Please ensure that you select the correct firmware for the controller. Either Active/Active or Active/Passive.

Using this you can also flash the firmware of the Disk enclosures (MSA 20's) connected to the 1500 controller shelf.

The entire details are in the link given by IBaltay.
Basheer_2
Trusted Contributor

Re: Instructions on upgrading F/W on SAN 1500MSA CS System

If you have support, HP will do it free fro you.
Wickedsunny
Valued Contributor

Re: Instructions on upgrading F/W on SAN 1500MSA CS System

JCO,

Hope you were able to update the MSA. Do let us know if there are any issues.

Cheers,
Sunny