HPE Community
Disk Enclosures
1753543 Members
5451 Online
108795 Solutions
New Discussion юеВ

Re: LUN on VA can't be formatted on NT4.0

 
Kurt Beyers.
Honored Contributor

тАО06-26-2002 05:42 AM

тАО06-26-2002 05:42 AM

Re: LUN on VA can't be formatted on NT4.0

Vincent,

I've uploaded the host table after the recreation of the LUN's again. But without any success.

And it shouldn't matter. The access rights to the new LUN's are set back to 0 after the creation of the LUN's and this has to be modified again. But the host table shouldn't reset if you delete / create a LUN.

Thanks,
Kurt
0 Kudos
Reply
Vincent Fleming
Honored Contributor

тАО06-26-2002 05:54 AM

тАО06-26-2002 05:54 AM

Re: LUN on VA can't be formatted on NT4.0

Hmm...

The only thing I can think of now is to check the HBA driver revision. What version is it?

No matter where you go, there you are.
0 Kudos
Reply
Kurt Beyers.
Honored Contributor

тАО06-26-2002 09:18 PM

тАО06-26-2002 09:18 PM

Re: LUN on VA can't be formatted on NT4.0

Vincent,

I've installed the following driver (which I've downloaded from the HP site):

drv_nt40_d8602_3041070.exe

So this is a pretty recent release. We're investigating if there are other registry settings that need to be modified on the Windows box.

Kurt

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.